實驗設備
 
電機實驗室
電機機械
精密控制
智慧型機器人
嵌入式系統
航空機電
熱流交換
液氣壓控制
程序控制
替代能源科技
產品簡介>實驗設備>嵌入式系統>車用電子CAN bus學習方案
車用電子CAN bus學習方案
CAN bus training solution
 
簡介
 

CAN Bus學習方案,是一套設計用來讓學生,學習熟悉,並發展的汽車電子CAN Bus通訊協定系統。其中包含了四組,如同一般車用完整的電路控制單元(ECUs)。這些電路模組,模擬了方向燈,切換開關,以及多組感測器。軟體部分讓學生可以使用流程圖語言建構每個CAN電路單元。這讓不同學生可以清楚的了解汽車通訊的架構,或是進行更深入細部的研究。此系統另外包含CAN Bus協定分析儀,訊息產生器及電腦診斷分析軟體。

Benefits
 
• Allows students to investigate CAN at a high level without
  getting bogged down in programming detail
• Flowchart software allows students to concentrate on CAN
  strategy and protocol
Features
 
• Allows rapid development of CAN systems
• Suitable for investigation of the CAN protocol
• Includes full CAN diagnostic and message generation tools
• Complete suite of hardware modules and sensors
• CAN Flowcode macros available
• Includes Flowcode
Description
 
This training solution is designed to facilitate the development and investigation of systems that use the CAN bus protocol for communications. The solution is comprised of four fully programmable CAN nodes which mimic Electronic Control Units (ECUs) in an automotive application. These are mounted on rugged backplanes and are fitted with ancillary circuit boards which mimic the functions of indicator lamps, switches and sensors. The software supplied allows students to program each of the four nodes in flow charts to form a fully functioning CAN system. The solution is suitable for automotive students who simply need to understand how CAN works, and for electronic students who want to understand more details of the CAN protocol. The software supplied operates at several levels so that different types of student are exposed to the only relevant details of the CAN system. A
CAN bus analyzer and message generator is supplied with the solution.
The product is shipped in rugged plastic trays for storage and transport. A teacher’s manual is included in the system with a number of suggested exercises that can be carried out in the classroom.
Learning objectives
 
This equipment and associated
curriculum is designed for two levels of
student:
Firstly the equipment can be used for
automotive technicians to gain an
appreciation of CAN technology and
the equipment used in fault finding CAN
systems, and how that fault finding takes
place. These technicians are expected
to download and review programs
made in flow charts, but are not
expected to carry out any programming
tasks. Level 1 learning outcomes are:
To understand what a microcontroller
is and that it can be programmed with
software to perform different tasks, To
understand the nature of an ECU and
the main component parts of an ECU.
To understand that software can change
the way an ECU operates. To
understand the nature of CAN and the
basic CAN protocol, and the basic
structure of a CAN network.
Secondly the equipment can be used by
more advanced students to gain an
understanding of CAN technology and
to allow them to construct networks
which communicate in CAN and higher
level protocols. These students are
expected to develop their own CAN
networks using flowcharts with CAN
macros provided. The use of flow
charts here will allow the students to
understand CAN protocols and
communication without the need for
the students to get bogged down in the
processes of lower level CAN bus
software construction. Level 2 CAN
learning outcomes are all those in
Level1 and:
To understand CAN transmit and
receive messages and the top level
CAN protocols. To understand CAN
message structure. To understand and
construct a fully operational CAN
system with four nodes working at
once. To gain an insight into higher level
protocols like DeviceNET and
CANOPEN.
Pack contents
 


The table below gives a list of the pack contents. Datasheets on any individual item are available on request.

Tray Qty Code Description
1 1 EB744 CAN bus teachers notes
1 1 EB880 Can bus solution CD ROM
1 1 EBPUB E-blocks publicity sheet
1 1 EL239 USB CAN sniffer
1 1 ELSAM ELSAM mini CD ROM
1 1 HP2045 Shallow plastic tray
1 1 HP233 Hardware Warranty card
1 1 HP3844 Foam insert for trays
1 1 HP4039 Lid for plastic trays
1 1 HP9734 Cardboard box for trays
1 2 HPPSU2 Adjustable power supply
1 1 HPUSB USB lead
1 1 HSTMP Wide range stainless steel temperature probe
1 1 TEFLCSI2 Flowcode for PICmicro MCUs v2
2 1 BP232 E-blocks backplane - tray compatible
2 1 EB00400 E-Blocks LED board
2 1 EB00500 E-Blocks LCD board
2 2 EB00600 E-blocks USB Multiprogrammer
2 2 EB00700 E-Blocks Switch board
2 2 EB01800 E-blocks CAN board
2 1 EB634 E-blocks IDC cable
2 1 EB704 E-blocks LED board cover
2 1 EB705 E-blocks LCD board cover
2 2 EB706 E-blocks PICmicro multiprogrammer cover
2 2 EB707 E-blocks switch board cover
2 2 EB718 E-blocks CAN board cover
2 1 HP2045 Shallow plastic tray
2 1 HP3844 Foam insert for trays
2 1 HP4039 Lid for plastic trays
2 1 HP9734 Cardboard box for trays
3 1 BP232 E-blocks backplane - tray compatible
3 1 EB00300 E-blocks sensor interface
3 1 EB00400 E-Blocks LED board
3 2 EB00600 E-blocks USB Multiprogrammer
3 2 EB01800 E-blocks CAN board
3 1 EB029 E-blocks Kvaser analyser interface board
3 1 EB704 E-blocks LED board cover
3 2 EB706 E-blocks PICmicro multiprogrammer cover
3 2 EB718 E-blocks CAN board cover
3 1 HP2045 Shallow plastic tray
3 1 HP3844 Foam insert for trays
3 1 HP4039 Lid for plastic trays
3 1 HP9734 Cardboard box for trays

使用手冊
  使用手冊下載
 
 

 

地址:臺北市新生南路三段四號十四樓 Tel:(02) 2363-5044 Fax:(02) 2362-9611 E-mail:airex@ms10.hinet.net
CopyRightsc2006. All Rights Reserved to Airex. design by JULY info.